hydrovane 90d

Discuss construction equipment here

Topic author
john-m
Posts: 14
Joined: Tue Dec 13, 2011 10:09 am
Real name: John
Been thanked: 2 times
Flag: Falkland Islands

hydrovane 90d

Post #1 by john-m » Wed Dec 14, 2011 12:12 pm

Thought Id better start my own thread for this but does anyone know where I can get a service kit and parts for a 90d as I have oil coming out with the air, also anyone got any starting instructions and maintance stuff for them.

cheers john


martyn williams
Posts: 6393
Joined: Mon Nov 03, 2008 8:06 pm
Real name: MARTYN WILLIAMS
Location: South Wales
Has thanked: 296 times
Been thanked: 355 times

Re: hydrovane 90d

Post #2 by martyn williams » Wed Dec 14, 2011 1:33 pm

I have done a fair bit on the Hydrovanes.
Service kits are on Ebay ,type in Hydrovane.
Starting is straight forward,from cold.Go to preheat position on the switch,older machines are fitted with a thermostart. You will se a lever on the compressor air end, ( on compressor air end body same side as start key ) pull this lever up. Go to start engine after pre heat.turn engine over till it fires,release lever on air end casing.Run for a few minutes to warm through then couple up air line and use.
Oil in air is a sign that separators need servicing,but can also be wrong grade of oil.
The air end on an 90D Hydrovane is a CWD 66.oil is Shell rotella SX 30 takes 5 ltrs
Martyn


Topic author
john-m
Posts: 14
Joined: Tue Dec 13, 2011 10:09 am
Real name: John
Been thanked: 2 times
Flag: Falkland Islands

Re: hydrovane 90d

Post #3 by john-m » Wed Dec 14, 2011 6:55 pm

thanks for the reply but cant find any kits for a cwd66 I will contact the firms on there and see if they do them.

cheers john


martyn williams
Posts: 6393
Joined: Mon Nov 03, 2008 8:06 pm
Real name: MARTYN WILLIAMS
Location: South Wales
Has thanked: 296 times
Been thanked: 355 times

Re: hydrovane 90d

Post #4 by martyn williams » Wed Dec 14, 2011 8:29 pm

Try these
ThoriteDirect web customer support:
Email: online@thorite.co.uk
Tel: 0800 034 1811
Fax: 0800 136918

For general sales and all other enquiries:
Email: sales@thorite.co.uk
Tel: 0800 034 5850
Fax: 0800 136918


Topic author
john-m
Posts: 14
Joined: Tue Dec 13, 2011 10:09 am
Real name: John
Been thanked: 2 times
Flag: Falkland Islands

Re: hydrovane 90d

Post #5 by john-m » Thu Dec 15, 2011 6:45 pm

Thanks for the reply tried thorite but they dont do moblie stuff.

cheers john


martyn williams
Posts: 6393
Joined: Mon Nov 03, 2008 8:06 pm
Real name: MARTYN WILLIAMS
Location: South Wales
Has thanked: 296 times
Been thanked: 355 times

Re: hydrovane 90d

Post #6 by martyn williams » Thu Dec 15, 2011 8:24 pm

Head Office



Claybrook Drive
Washford Industrial Estate
Redditch
Worcestershire
B98 0DS
United Kingdom

Telephone: +44 (0) 1527 525522
Fax: +44 (0) 1527 521140
E-mail: hydrovane.red@gardnerdenver.com

Maybe this will help :thumbup:
Martyn


Topic author
john-m
Posts: 14
Joined: Tue Dec 13, 2011 10:09 am
Real name: John
Been thanked: 2 times
Flag: Falkland Islands

Re: hydrovane 90d

Post #7 by john-m » Fri Dec 16, 2011 11:37 am

thanks for your help martyn but still know joy they say they are to old and I wont get any parts from compair for it. any other ideas

cheers john


martyn williams
Posts: 6393
Joined: Mon Nov 03, 2008 8:06 pm
Real name: MARTYN WILLIAMS
Location: South Wales
Has thanked: 296 times
Been thanked: 355 times

Re: hydrovane 90d

Post #8 by martyn williams » Fri Dec 16, 2011 11:58 am

Contact one of the Ebay sellers,compressor man,I think he goes under. I will ask around.There is a firm near Bristol that may have old Hydrovane stock. They did have a Hydrovane 90 D for parts there.
Martyn






Keynsham Plant Services
Unit 7A / Burnett Business Pk
Gypsy Lane
Bristol
Avon BS31 2ED


Topic author
john-m
Posts: 14
Joined: Tue Dec 13, 2011 10:09 am
Real name: John
Been thanked: 2 times
Flag: Falkland Islands

Re: hydrovane 90d

Post #9 by john-m » Mon Oct 08, 2012 9:19 pm

Well just like to say thanks for the help so far. I finally got round to get it striped down and got the new parts for the seperator (AAcompressorkits). next problem is getting it back together as I need to press the end cap down to be able to get the the tube with the lifting eye in. has anyone done this if so what did you use to press it down?

cheers john


martyn williams
Posts: 6393
Joined: Mon Nov 03, 2008 8:06 pm
Real name: MARTYN WILLIAMS
Location: South Wales
Has thanked: 296 times
Been thanked: 355 times

Re: hydrovane 90d

Post #10 by martyn williams » Wed Oct 10, 2012 10:35 pm



Return to “Construction Equipment”

Who is online

Users browsing this forum: No registered users and 2 guests