Liner site dumper

Discuss construction equipment here

Johnyboy
Posts: 1
Joined: Sat Nov 28, 2015 1:47 pm
Real name: John
Has thanked: 1 time
Been thanked: 1 time
Flag: Great Britain

Re: Liner site dumper

Post #41 by Johnyboy » Sun Feb 07, 2016 10:22 am

Hi
Turns out it's got a lister SR1 engine. I removed the head and gave it a de-Coke, ground in the valves. Bump clearances were wrong. It was on a 20 " piston with no bore wear!!! Runsweet now and starts very easy even in the winter. Replaced the steering box with a Land Rover series three, overhauled the rod / drum brakes and replacecd an oil seal on one of the half shafts. Tin work was shot blasted and repainted. Bit more to do-but these old dumpers are great projects.
Image
Image
Image


cobbadog
Posts: 47
Joined: Thu May 17, 2018 6:08 am
Real name: John
Location: Coopernook. NSW. Australia
Has thanked: 26 times
Been thanked: 15 times
Flag: Australia

Re: Liner site dumper

Post #42 by cobbadog » Tue May 22, 2018 7:44 am

You have done a nice job on the restoration. We feel we have the same model but with the SR2 twin cylinder engine in it along with a Newage Coventry 3 speed gearbox. We have no ID tag on the rear panel near where you crank start but have serial numbers of the engine, gearbox and what appears to be a chassis number stamped on a brass tag fixed to the floor area behind the bin.
Any clues as to where to look for more info will be greatly appreciated.
John


Return to “Construction Equipment”

Who is online

Users browsing this forum: No registered users and 1 guest