The Classic Machinery Network

No worries Ian.... there are plenty of versions of the Bryce pump..... I was worried this kit wouldnt fit, as the pump numbers on the plate were very worn. I just took a gamble.

Many thanks Jeremy. Having just read the manual again, it does state clean out with fresh fuel...

Does anyone know if the internals need lubrication when being reassembled, and what type. I'd say a smear of red grease....

Not sure why you say it's not serviceable. Got it stripped down and just taking off the last of the paint with a bath of paint remover. Going to stick it in the parts washer in the morning. Rebuild sometime in the week. http://www.classicmachinery.net/forum/images/userpix/47367_1KJP165RSWGO816497072...

It ran well before I left the poor girl alone for a few years. Rebuild kit arrived this morning. Also found the main tappet return spring broken http://www.classicmachinery.net/forum/images/userpix/47367_365KJ7ZIDG6CK1649701079.jpg http://www.classicmachinery.net/forum/images/userpix/47367_1G4WNGR7A...

https://simplybearings.co.uk/shop/Seals-All-Oil-Seals/c19_4463/index.html?selection=Oil+Seals I use Simply Bearings for my seals and bearings. Cheap as chips, and a huge stock range... Treat yourself to a cheap pair of digital calipers, about a fiver from Ebay, and you can measure the shaft and diam...

I decided to get the dumper started last week, but it woudnt fire up. Tried and tried to wang it over but nothing. I tried to bleed the fuel system but couldnt get the fuel from the pump to the injector. So, today I took off the fuel pump, to find both the fuel pumo, and the actuator from the engine...

That seats not bad, and a very nice machine. ... someone welded an office chair onto my 3C3

Can you post up some pictures Steve. I need a seat post, that works. I have a brand new JCB seat, and need a good post to fix it to. Also, whats the dash surround like. Mines been melted at some point, and I'd like to do a good dash restoration, with new modern switches.

Ive got the rear extending dipper... oh yes, it makes the front very light. Easy to wheelie a 7 ton digger when its out a little bit...