The Classic Machinery Network

Well done Spud

Three cheers for Mark for the show and tell!!!

Thanks for the effort, makes my work seem like a sunday picnic

How do I give you a thanks?

Edit:
I worked it out and one given to you Mark, for this thread and the time you have spent replying to my posts.

Well Done
John

There is a rod that connects to the clutch pedal that can be adjusted.

Do you have the grease container connected?

This info can be found in the manual:
downloads.php?cat=5

Also the steering pump is on the othe side of the motor below the injector pump for the 3c Mk11

interesting
John

Hi Mark

Good to see some action. Been a very busy boy working and have not got back to the dear old gilr yet. No name yet

Cheers
John

mini78 wrote:On my 3CII 11 O'Clock is loose 2 O'Clock is locked as you look at the lever. Hope this helps but I expect youv've figureded it by now.
Regards. Simon

Been a way for a while.

Thanks Simon for the info.
John

Hi Mark

Thanks for the photos and the update. At least you know what you have in front of you. Sometimes it makes it a bit easier.

Been too busy doing other things to do anything to mine.

All the best
John

Just an update: I finally got the back of the geabox cover off yesterday. Two nuts where, well very difficult. I do not have access to a heat gun/oxy set so had to wait till I could find a ring spanner to fit the nut. So now up to finding a 3/4inch socket for the wheel nuts there are two that will n...

Thanks digerjones

It is a good feeling getting something working. I put it in the central postion (hoe) and will not move it much as I reckon the hoses may not be too happy since they have been fixed in one position for so long. Decades I reckon from the colour of the paint.

Once again Thanks
John

Hi Thanks for the replies. In the manual it says to push up or down. Will it is really a swivel to left or right. I tried what some have suggested. I tried pushing from the back and then from the sides. What I need to know is which way to turn the control. I did remove a lot of soil,clay and pieces ...