Search found 76 matches

by Whitlock 505
Tue May 22, 2018 10:10 am
Forum: Dumpers
Topic: Two different dumpers conjoined
Replies: 1
Views: 58
Flag: Wales

Two different dumpers conjoined

Hi Guys Thought I'd share the latest project that I've been working on, I bought this dumper off facebook marketplace for £600 as I thought it was a bit different, and after losing out on a thwaites 4000 and Winget 4/70 ,after major repairs to the newage 40m gearbox i decided to do some research as ...
by Whitlock 505
Mon May 21, 2018 10:26 pm
Forum: Dumpers
Topic: Hello everyone, I.D my little dumper please
Replies: 4
Views: 224
Flag: Wales

Re: Hello everyone, I.D my little dumper please

hi It looks like it may be a1963 Benford 15 with the rear of the wings being modified, if you look at the thread british dumpers on here there is a brochure for one on page 4 I think and the manuals are in a thread named "15cwt(?) circa 1972 dumper exact date" if the link below does not wo...
by Whitlock 505
Mon May 07, 2018 7:44 pm
Forum: Loaders/Backhoes
Topic: Perkins 4236 saga continues
Replies: 4
Views: 214
Flag: Wales

Re: Perkins 4236 saga continues

Well I lined up all the timing marks and then repositioned the diesel pump gear to the correct position with the 241 as per the youtube video and hey it started within 3 cranks!!! Success and a feeling of achievement! http://www.classicmachinery.net/forum/images/userpix/62843_3KXFTN7KB7CW01525715062...
by Whitlock 505
Sun May 06, 2018 10:08 am
Forum: Loaders/Backhoes
Topic: Perkins 4236 saga continues
Replies: 4
Views: 214
Flag: Wales

Perkins 4236 saga continues

Just to update you on the saga of the rebuild! And hopefully people can take learning tips from our mistake :dizzy: Having never attempted any gearbox or engine rebuilds before I saw this as a challenge and after methodically going through all the rebuild stages with the owner, I.e crank regrind, ne...
by Whitlock 505
Sun Apr 29, 2018 8:36 am
Forum: Dumpers
Topic: Rod brakes repairs tip
Replies: 1
Views: 519
Flag: Wales

Re: Rod brakes repairs tip

Good tip fair play
by Whitlock 505
Thu Apr 26, 2018 3:36 pm
Forum: Excavators
Topic: Thwaites Alldig
Replies: 10
Views: 535
Flag: Wales

Re: Thwaites Alldig

So you transferred the fault by swapping the pipes over? I would plump for the oil supply feed being the problem and not an internal problem with the ram seals, I was thinking it was a ram problem and the end had come off and was blocking the port, had this happen to me :dizzy:
by Whitlock 505
Thu Apr 26, 2018 2:30 pm
Forum: Loaders/Backhoes
Topic: Perkins 4236 engine rebuild rocker shaft
Replies: 6
Views: 350
Flag: Wales

Re: Perkins 4236 engine rebuild rocker shaft

Thanks for the replies guys, its the small block that sits on top of the valve stem, after much toing and froing with emails and after the manufacturer firstly denying there was a manufacture problem they have now admitted there is a production problem, they are saying it will be weeks before it is ...
by Whitlock 505
Tue Apr 24, 2018 4:40 pm
Forum: Loaders/Backhoes
Topic: Perkins 4236 engine rebuild rocker shaft
Replies: 6
Views: 350
Flag: Wales

Perkins 4236 engine rebuild rocker shaft

Hi Guys After some information on what size a perkins 4236 rocker shaft should be unworn? Ordered a left hand and a right hand rocker arm from malpas online and reassembled rocker shaft without checking parts assuming they were right :dizzy: ,when it came to do the valve clearances the left hand roc...
by Whitlock 505
Wed Apr 11, 2018 10:08 pm
Forum: Loaders/Backhoes
Topic: Jcb 3cx black cab manual
Replies: 5
Views: 236
Flag: Wales

Re: Jcb 3cx black cab manual

I think if you go to the download section here, there is one
by Whitlock 505
Sat Mar 17, 2018 11:16 pm
Forum: Dumpers
Topic: 40M2S and 40M2T interchangeable?
Replies: 7
Views: 499
Flag: Wales

Re: 40M2S and 40M2T interchangeable?

Hi Glen

That's what I replaced the needle bearing with a brass one, after rebuilding the casing, had to make sure there was an oil journal around the bearing for lubrication

Ian

Go to advanced search