The Classic Machinery Network

Hi everyone. Does anybody know where I would get parts for a bamford super 59 baler, specifically part b451 in the uk or ireland?

i would imagine the one beside the seat with the square handle is the spool valve

Checked alternator over the weekend with a multimeter and its working fine. Checked the dashboard and found the break in the circuit. Sadly it could not be fixed as i do not possess a soldering gun. So i bought a separate bulb holder and wired that to the ignition instead and this seems to be workin...

as far as i know the reason the battery is not charging is due to the ignition light no longer working and the circuit is broken. My father in law has a 272 also and it has an ignition light fitted separately to the dash, so i will probably do the same. the ignition light was working when i got the ...

sorry bout the delay in getting back! got the tank back last weekend, and happy to report that that its working fine now!! time to move on to the next few problems, such as replacing the bushings in the steering, tightening the brakes, rewiring the ignition switch as the battery is not charging........

Hi guys, So set about cleaning the tank over the weekend. I examined the tank with a torch and it didn't seem too bad, so decided to just swill it out a couple of times with diesel. This was working well, until disaster! A hole appeared in the bottom of the tank! Obviously it had rusted on the insid...

Opened the tap fully on the bottom of the tank this evening and took off the fuel line, and nothing came out, knowing there was at least 2 gallons of fuel in it!!! Took the tap off the tank and the fuel tap gauze was really gummed up. I rang the local supplier and he has one in stock, so will have i...

Thanks lads, will try that this evening and will get back with the results ASAP!

I recently purchased a leyland 272, for the first while it was running fine, but then started to cut out after running for a while. I suspected it was a dirty fuel filter as i had this problem with a DB a few years ago. I replaced the filter but this did not solve the problem. The problem seems to b...