Search found 506 matches
- Fri May 10, 2024 2:59 pm
- Forum: Loaders/Backhoes
- Topic: JCB 3CX Fuel Level Sender
- Replies: 7
- Views: 370
- Flag:
Re: JCB 3CX Fuel Level Sender
The screws on mine looked that way but they came out, (gently does it) The float had disappeared on mine. Got the new one from Vicary plant it came with a separate earth tag. Ignition on, earth the lead from the gauge to the sender unit the gauge should read full, that proves the gauge is OK. Norm.
- Fri May 10, 2024 9:19 am
- Forum: Loaders/Backhoes
- Topic: JCB 3CX Fuel Level Sender
- Replies: 7
- Views: 370
- Flag:
Re: JCB 3CX Fuel Level Sender
Inside. There's an access hole at the back of dash to the left in the steelwork, the hole on mine was a bit off centre to the sender unit so I opened it up with a die grinder, made life easier.You will have to remove a couple of dash panels to access it. Once you gain access it's a straight forward ...
- Thu May 09, 2024 11:54 pm
- Forum: Loaders/Backhoes
- Topic: JCB 3CX Fuel Level Sender
- Replies: 7
- Views: 370
- Flag:
Re: JCB 3CX Fuel Level Sender
Spancan
Same prob on my 84 3cx. changed the sender unit. There's a plate on top of the diesel tank to the left of the dash. just a little bit fiddly. I got the unit from Vicary Plant.
Norm.
Same prob on my 84 3cx. changed the sender unit. There's a plate on top of the diesel tank to the left of the dash. just a little bit fiddly. I got the unit from Vicary Plant.
Norm.
- Mon Apr 29, 2024 11:58 pm
- Forum: Dumpers
- Topic: Parts for Petter engine - available??
- Replies: 3
- Views: 491
- Flag:
Re: Parts for Petter engine - available??
freddyuk. L.E.S. engineering sell stuff for Petters, don't Know about the rocker oil feed pipe ,they might point you in right direction.
Norm
Norm
- Sat Mar 23, 2024 10:43 am
- Forum: Heavy Haulage
- Topic: Classic pictures Updated 18/05/2024
- Replies: 4299
- Views: 3074678
- Flag:
Re: Classic pictures Updated 20/03/2024
essexpete wrote:Jeremy Rowland wrote:essexpete wrote:mechman wrote:Hi all
Unusual bucket arrangement on the tracked loader, second last pic.
Norm.
Looking at the bucket teeth, it must load over?
It does look like it loads over, bet the operator had a sore neck after a shift on that.
Jeremy
Proper nasty but better than a shovel!
JUST.
- Thu Mar 21, 2024 10:31 am
- Forum: Heavy Haulage
- Topic: Classic pictures Updated 18/05/2024
- Replies: 4299
- Views: 3074678
- Flag:
Re: Classic pictures Updated 20/03/2024
Hi all
Unusual bucket arrangement on the tracked loader, second last pic.
Norm.
Unusual bucket arrangement on the tracked loader, second last pic.
Norm.
- Thu Feb 15, 2024 12:09 pm
- Forum: Loaders/Backhoes
- Topic: JCB 3cx
- Replies: 12
- Views: 22387
- Flag:
Re: JCB 3cx
Agrimax.
Gotcha.
Norm.
Gotcha.
Norm.
- Wed Feb 14, 2024 11:40 am
- Forum: Loaders/Backhoes
- Topic: JCB 3cx
- Replies: 12
- Views: 22387
- Flag:
Re: JCB 3cx
Pete. It's a different set up to the old 3Cs.( It would be) It has some kind of linkage at the bottom of the operating lever that slides a thingy in the valve block.It can be attached in several positions, don't know if that makes a difference. I'm going to try cracking a hose to determine the press...
- Wed Feb 14, 2024 1:46 am
- Forum: Loaders/Backhoes
- Topic: JCB 3cx
- Replies: 12
- Views: 22387
- Flag:
Re: JCB 3cx
Pic.
- Tue Feb 13, 2024 8:15 pm
- Forum: Loaders/Backhoes
- Topic: JCB 3cx
- Replies: 12
- Views: 22387
- Flag:
Re: JCB 3cx
Hi all. A little info required if possible. My JCB 3CX has a carriage that seems to be stuck in the middle of the rails. The operating lever was seized solid. I had to remove it from the machine to free it. Now that it's free it still doesn't work.Does the lever have to be pushed away from driver or...