Search found 2169 matches

by FOWLER MAN
Mon Jan 21, 2019 3:55 pm
Forum: Excavators
Topic: Hymac 580 C Cross-Line Relief Valve Adjustment
Replies: 7
Views: 409
Flag: Wales

Re: Hymac 580 C Cross-Line Relief Valve Adjustment

Hi, I'm sure Jeremy will have sorted you out, but in answer to your question the cross line release valve only has one pressure setting so there is no way to vary the pressure to left or right. You problem is probably with one of the two check valves which you will find in the tubes feeding the Staf...
by FOWLER MAN
Sat Jan 19, 2019 12:32 pm
Forum: Loaders/Backhoes
Topic: Staliser ram rebuild.
Replies: 3
Views: 201
Flag: Wales

Re: Staliser ram rebuild.

Hi Thanks very much for your answer to my question. When I reassemble the piston to the rod how do you get the dowel to line up with the hole in the rod? Do you just drill a new hole or do you mark the piston and rod before removal? Thanks in advance. Sam. If fitting new rod and or piston nut they ...
by FOWLER MAN
Fri Jan 18, 2019 7:22 pm
Forum: Excavators
Topic: Total novice just bought a JCB 5C - help!
Replies: 10
Views: 754
Flag: Wales

Re: Total novice just bought a JCB 5C - help!

Hi Malcom, I too wish you success with your purchase. The engine servicing you will be familiar with. I don't know the 5C but here are a few pointers for the hydraulics. There will be a washable meatal suction strainer on the pickup in the hydraulic tank and in a long service machine like yours it w...
by FOWLER MAN
Tue Jan 15, 2019 4:32 pm
Forum: Loaders/Backhoes
Topic: 3c3 - Cleaning hydraulic oil strainer
Replies: 5
Views: 109
Flag: Wales

Re: 3c3 - Cleaning hydraulic oil strainer

Hi, When you remove the plate you will loose all the oil in the reservoir, say about half the total hydraulic oil. Be prepared for, (from memory), possibly 15 or 20 gallons, (100 litres). Drain the oil through the drain plug in the plate before removing it. Fully extend all rams to minimise the oil ...
by FOWLER MAN
Wed Jan 02, 2019 9:22 pm
Forum: Loaders/Backhoes
Topic: Staliser ram rebuild.
Replies: 3
Views: 201
Flag: Wales

Re: Staliser ram rebuild.

Hi, It's not an Allen bolt under the seal, but a dowel. The dowell will have a threaded hole tapped into it so that you can insert a bolt to pull it out. JCB also use Threadlock or Loctite to secure the piston nut and gland seal, (end cap), housing. These are usually very tight and difficult to undo...
by FOWLER MAN
Sun Dec 30, 2018 9:11 pm
Forum: Heavy Haulage
Topic: Classic pictures Updated 20/01/2019
Replies: 3018
Views: 281348
Flag: Wales

Re: Classic pictures Updated 27/12/2018

Is the dustcart a Market Transport body? They appear to be building a landfill embankment right beside a new build? For me the interesting thing in that pic. is the Cletrac, (BLAW-KNOX)??, dozer similar to the one "Dinky Toys" made some 70 years ago. http://www.classicmachinery.net/forum/...
by FOWLER MAN
Sun Dec 23, 2018 9:52 pm
Forum: Dumpers
Topic: George Fowell OR Fowler Dumpers
Replies: 71
Views: 13652
Flag: Wales

Re: George Fowell OR Fowler Dumpers

Yes Craig. I remember these GFs working on an extension to my school circa 1952.
by FOWLER MAN
Fri Dec 21, 2018 3:59 pm
Forum: Dumpers
Topic: Seasons Greetings
Replies: 4
Views: 1040
Flag: Wales

Re: Seasons Greetings

Hi,
Just like to add my good wishes to all. Have a "Happy Christmas" and good health to enjoy a "Happy and Prosperous New Year." :D :thumbup:

My thanks too, to Holger, and to everyone who has contributed to the forum. :claphands: :bow:

Fred
by FOWLER MAN
Mon Dec 03, 2018 12:00 pm
Forum: Excavators
Topic: Hymac Excavators
Replies: 1091
Views: 104279
Flag: Wales

Re: Hymac Excavators

Hi, Here's one for Jeremy. http://www.classicmachinery.net/forum/images/userpix/2600_1H94LDAXYBV3L1543831158.jpg http://www.classicmachinery.net/forum/images/userpix/2600_3B9YFXRGDFK001543831159.jpg http://www.classicmachinery.net/forum/images/userpix/2600_1DKFC43FCO201543831159.jpg
by FOWLER MAN
Mon Nov 12, 2018 2:40 am
Forum: Companies
Topic: Richards and Wallington
Replies: 61
Views: 17898
Flag: Wales

Re: Richards and Wallington

Hi Ian, Great to see those pics, not only did I work on plant on hire to Christiani Shand on that job circa 1969, (I was there to repair a Case 450 the day before the crane came off the top), but I crossed that bridge a couple of times as a boy on trips to Barry Island. Over the bridge, through the ...

Go to advanced search